Locks and Security
1.
position, then press the power door
UNLOCK control 3 times.
Turn the ignition to the 4 (ON)
3
2
2.
position, then press the power door
UNLOCK control 3 times.
Turn the ignition to the 3 (OFF)
4
1
5
3.
position. The horn will chirp one time as confirmation that the
programming mode is staged.
Turn the ignition to the 4 (ON)
4.
Within 5 seconds, press the power door UNLOCK control and then
press the power door LOCK control. Not e: The horn will chirp once if
autolock was deactivated or chirp once then honk (one short and one
long chirp) if autolock was activated.
5.
Turn the ignition to the 3 (OFF) position. The horn will chirp once to
confirm the procedure is complete.
Smart unlocking feature
The smart unlocking feature helps prevent you from locking yourself out
of the vehicle. With the key in any ignition position, the driver’s door will
automatically unlock if it is locked using the power lock control on the
driver’s door panel while the driver’s door is open.
CHILDPROOF DOOR LOCKS
•
When these locks are set, the
rear doors cannot be opened from
the inside.
•
The rear doors can be opened
from the outside when the doors
are unlocked.
The childproof locks are located on
rear edge of each rear door and
must be set separately for each
door. Setting the lock for one door will not automatically set the lock for
both doors.
•
•
Move lock control up to engage the childproof lock.
Move control down to disengage childproof locks.
64
2007
Taurus (tau)
Owners Guide (post-2002-fmt)
USA (fus)
| Categories | Ford Manuals, Ford Taurus Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)