Lights
To replace the LED module:
Remove the two outboard
1.
grommets from the inside of the
decklid.
2.
remove the three nuts that hold the
spoiler on and remove the spoiler.
On the inside of the decklid,
3.
On the underside of the spoiler,
remove the two decorative screw
covers (on the LED module) .
4.
Remove the two screws that are
holding the LED module in place.
5.
Remove the wiring harness
grommet and disengage the
electrical connector.
6.
Replace the LED module.
7.
To complete installation, follow
the removal procedure in reverse order.
Replacing license plate lamp bulbs
1.
Make sure headlamp switch is in
OFF position and open trunk lid.
2.
Carefully twist and pull the
socket from the lamp housing.
3.
Carefully pull the bulb from the
socket and push in the new bulb.
4.
Reinstall the socket in the lamp
housing and twist to secure.
39
2007
Taurus (tau)
Owners Guide (post-2002-fmt)
USA (fus)
Product Specification
Categories | Ford Manuals, Ford Taurus Manuals |
---|---|
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |