Seating and Safety Restraints
The driver and front passenger BeltMinder features can be
deactivated/activated by performing the following procedure:
Before following the procedure, make sure that:
•
•
•
•
The parking brake is set
The gearshift is in P (Park) (automatic transmission)
The ignition switch is in the OFF position
The driver and front passenger safety belts are unbuckled
To reduce the risk of injury, do not deactivate/activate the
BeltMinder feature while driving the vehicle.
1.
Turn the ignition switch to the RUN (or ON) position. (DO NOT
START THE ENGINE)
2.
Wait until the safety belt warning light turns off. (Approximately 1
minute)
•
Step 3 must be completed within 50 seconds after the safety belt
warning light turns off.
3.
For the seating position being disabled, at a moderate speed, buckle
then unbuckle the safety belt 9 times, ending in the unbuckled state.
(
Step 3 must be completed within 50 seconds after the safety belt
warning light turns off.)
•
After Step 3, the restraint system warning light (airbag light) will be
turned on for three seconds.
4.
Within 10 seconds of the light turning on, at a moderate speed, buckle
then unbuckle the safety belt.
•
•
This will disable the BeltMinder feature for that seating position if it
is currently enabled. As confirmation, the restraint system warning
light will flash 4 times per second for 3 seconds.
This will enable the BeltMinder feature for that seating position if it
is currently disabled. As confirmation, the restraint system warning
light will flash 4 times per second for 3 seconds, followed by 3
seconds with the light off, then followed by the restraint system
warning light flashing 4 times per second for 3 seconds again.
96
2007
Taurus (tau)
Owners Guide (post-2002-fmt)
USA (fus)
| Categories | Ford Manuals, Ford Taurus Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)