Locks and Security
To reprogram the remote entry
transmitters:
3
2
1.
Ensure the vehicle is
electronically unlocked.
4
2.
3.
Put the key in the ignition.
1
5
Turn the key from the 2 (LOCK)
position to 3 (OFF) .
4.
Cycle eight times rapidly (within 10 seconds) between the 3 (OFF)
position and 4 (ON). Not e: The eighth turn must end in the 4 (ON)
position.
5.
The doors will lock, then unlock, to confirm that the programming
mode has been activated.
6.
Within 20 seconds press any button on the remote entry transmitter.
Not e: If more than 20 seconds have passed you will need to start the
procedure over again.
7.
The doors will lock, then unlock, to confirm that this remote entry
transmitter has been programmed.
8.
9.
Repeat Step 6 to program each additional remote entry transmitter.
Turn the ignition to the 3 (OFF) position after you have finished
programming all of the remote entry transmitters. Not e: After 20
seconds, you will automatically exit the programming mode.
10.
The doors will lock, then unlock, to confirm that the programming
mode has been exited.
Illuminated entry
The interior lamps illuminate when the remote entry system is used to
unlock the door( s) or sound the personal alarm.
The illuminated entry system will turn off the interior lights if:
•
•
•
•
the ignition is turned to the 4 (ON) position, or
the remote transmitter lock control is pressed, or
the vehicle is locked using the keyless entry keypad (if equipped) , or
after 25 seconds of illumination.
The dome lamp control (if equipped) must not be set to the off position
for the illuminated entry system to operate.
The inside lights will not turn off if:
•
they have been turned on with the dimmer control, or
69
2007
Taurus (tau)
Owners Guide (post-2002-fmt)
USA (fus)
| Categories | Ford Manuals, Ford Taurus Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)