Controls in detail
Power windows
Fully opening the windows
(Express-open)
Synchronizing power windows
!
If the upward movement of the window is
blocked during the closing procedure, the win-
dow will stop and open slightly.
The power windows must be synchronized
̈
Press switch 2 to 5 past the resis-
Remove the obstruction, pull the respective pow-
er window switch again past the resistance point
and release.
tance point and release.
ț
after the battery has been disconnect-
ed
The corresponding window opens com-
pletely.
ț
if the power windows cannot be fully
opened (Express-open) or closed
(Express-close)
If the window still does not close when there is
no obstruction, pull and hold the respective pow-
er window switch. The side window will then
close without the obstruction sensor function.
Fully closing the windows
(Express-close)
Synchronizing
̈
Pull switch 2 to 5 past the resis-
Stopping windows during Express-op-
eration
tance point and release.
̈ Close all doors.
The corresponding window closes com-
pletely.
̈ Switch on the ignition (୴ page 38).
̈
Press or pull the respective power win-
dow switch again.
̈
Pull switch 2 to 5 until the side win-
dows are completely closed.
Warning!
G
̈
Hold on to switches 2 to 5 for
approximately 1 second.
Driver’s door only:
The power windows are synchronized.
If within 5 seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not operate.
207
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS63 AMG, Mercedes-Benz W219 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)