Practical hints
Fuses
The electrical fuses in your vehicle serve to
switch off malfunctioning power circuits.
If a newly inserted fuse blows again, have
the cause determined and rectified by an
authorized Mercedes-Benz Center.
Before replacing fuses:
̈
̈
Apply the parking brake (୴ page 59).
If a fuse is blown, the components and sys-
tems secured by that fuse will stop operat-
ing.
Make sure the gear selector lever is set
A fuse chart is located in the fuse box in
the passenger compartment. The fuse
chart explains the fuse allocation and fuse
amperages.
to position P (୴ page 169).
̈
̈
̈
Turn off all electrical consumers.
G
Turn off the engine (୴ page 60).
Warning!
i In case of a blown fuse contact Roadside As-
sistance or an authorized Mercedes-Benz Cen-
ter.
Remove the SmartKey from the starter
switch.
Only use fuses approved by Mercedes-Benz
with the specified amperage for the system
in question and do not attempt to repair or
bridge a blown fuse. Using other than ap-
proved fuses or using repaired or bridged
fuses may cause an overload leading to a
fire, and/or cause damage to electrical
components and/or systems. Have the
cause determined and remedied by an
authorized Mercedes-Benz Center.
Vehicles with KEYLESS-GO*:
The electrical fuses are located in different
fuse boxes:
̈
Open the driver’s door.
ț
Fuse box in passenger compartment
(
୴ page 429)
ț
Fuse box in trunk (୴ page 429)
i A blown fuse must be replaced by an appro-
priate spare fuse (recognizable by its color or the
fuse rating given on the fuse) of the amperage
recommended in the fuse chart.
Any Mercedes-Benz Center will be glad to advise
you on this subject.
428
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS63 AMG, Mercedes-Benz W219 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)