Operation
Driving instructions
Brake pad wear or a leak in the system may
be the reason for low brake fluid in the res-
ervoir.
Warning!
G
Warning!
G
Make sure not to endanger any other road
users when carrying out these braking ma-
neuvers.
If other than recommended brake pads are
installed, or other than recommended brake
fluid is used, the braking properties of the
vehicle can be degraded to an extent that
safe braking is substantially impaired. This
could result in an accident.
The brake fluid level in the reservoir may
be too low if the brake warning lamp in the
instrument cluster comes on and an
acoustic warning sounds although the
parking brake is released (୴ page 347).
Observe additional messages in the multi-
function display that may appear
Refer to the description of the Brake Assist
System (BAS) (୴ page 90).
Be certain to read and observe the warning
notices on brake pad replacement
(
୴ page 374).
(୴ page 373).
Have the brake system inspected immedi-
ately. Contact an authorized
Mercedes-Benz Center.
!
When driving down long and steep grades,
relieve the load on the brakes by shifting into a
lower gear to use the engine’s braking power.
This helps prevent overheating of the brakes and
reduces brake pad wear.
All checks and service work on the brake
system should be carried out by qualified
technicians only. Contact an authorized
Mercedes-Benz Center.
After hard braking, it is advisable to drive
on for some time, rather than immediately
park, so that the air stream will cool down
the brakes faster.
Only install brake pads and brake fluid
recommended by Mercedes-Benz.
273
Product Specification
Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CLS63 AMG, Mercedes-Benz W219 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |