Getting started
Driving
Starting with KEYLESS-GO*
Warning!
Starting difficulties
If the engine does not start as described,
carry out the following steps:
G
̈
If you are starting the engine with the
SmartKey, turn SmartKey in starter
switch to position 0 and repeat starting
procedure.
As long as the SmartKey with KEYLESS-GO
is in your vehicle, the vehicle can be started.
Therefore, never leave children unattended
in the vehicle, as they could otherwise acci-
dentally start the engine.
̈ If you are starting the engine with
KEYLESS-GO: Close any doors that
may be open to allow for better detec-
tion of the SmartKey with
KEYLESS-GO.
When leaving the vehicle, always take the
SmartKey with KEYLESS-GO with you and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle.
KEYLESS-GO start/stop button
1
2
USA only
Canada only
Or:
̈ Make sure the gear selector lever is set
to P.
Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO.
You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button on the
gear selector lever.
̈
Depress the brake pedal during the
starting procedure. Do not depress
accelerator.
̈
̈
Repeat the starting procedure
(୴ page 51). Remember that extended
starting attempts can drain the battery.
The selector lever lock is released.
For information on turning off the engine
with KEYLESS-GO, see “Locking with
KEYLESS-GO*” (୴ page 62).
̈
Press KEYLESS-GO start/stop
button 1 once.
Get a jump start (୴ page 423).
The engine starts if the SmartKey with
KEYLESS-GO is in the vehicle.
The SmartKey with KEYLESS-GO must be
located in the vehicle.
52
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS63 AMG, Mercedes-Benz W219 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)