Practical hints
Replacing bulbs
Parking and standing lamp bulb
Replacing bulbs for rear lamps
License plate lamp
Halogen headlamps
Tail lamp unit
̈
Turn housing cover 2 counterclock-
wise and remove it.
The tail lamps are equipped with HiP bulbs.
G
̈
̈
̈
̈
Pull out bulb socket 5 with the bulb.
Pull the bulb out of the bulb socket 5.
Press the new bulb into bulb socket 5.
Warning!
The bulbs in the tail lamps cannot be re-
placed individually. The tail lamp bulbs are
under pressure and could explode during an
attempt to replace them.
Press bulb socket 5 back into the
lamp.
1 License plate lamp
2
Screws
̈
Align housing cover 2 and turn it
clockwise.
If the tail lamps are malfunctioning, have
them exchanged at an authorized
Mercedes-Benz Center.
̈ Turn the exterior lamp switch to
position M (୴ page 126).
Bi-Xenon* headlamps
̈
̈
̈
̈
̈
Loosen both screws 2.
Remove license plate lamp 1.
Replace the bulb.
In vehicles with Bi-Xenon* headlamps, the
bulbs of the parking and standing lamps
are LEDs.
Reinstall license plate lamp 1.
Retighten screws 2.
!
Do not replace the LEDs yourself. You could
otherwise damage the LEDs or parts of the vehi-
cle. Only have the LEDs replaced by an autho-
rized Mercedes-Benz Center.
409
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS63 AMG, Mercedes-Benz W219 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)