Practical hints
Towing the vehicle
Installing towing eye bolt
Front of vehicle
!
Towing of the vehicle should only be done
using the properly installed towing eye bolt. Nev- hazard warning flasher in use, turn SmartKey in
i To signal turns while being towed with the
er attach tow cable, tow rope or tow rod to the
vehicle chassis, frame or suspension parts.
starter switch to position 2 and activate the
combination switch for the left or right turn
signal in the usual manner – only the selected
turn signal will operate.
i When towing the vehicle with all wheels on
the ground, please note the following:
Upon canceling the turn signal, the hazard warn-
ing flasher will operate again.
With the automatic central locking activated and
the SmartKey in starter switch position 2, or
KEYLESS-GO* start/stop button in position 2,
the vehicle doors lock if the left front wheel as
i The selector lever will remain locked in park
position P and the SmartKey will not turn in the
well as the right rear wheel are turning at vehicle starter switch if the battery is disconnected or
speeds of approximately 9 mph (15 km/h) or
more.
discharged. For more information see “Battery”
(୴ page 420) or “Jump starting” (୴ page 423).
To prevent the vehicle door locks from locking,
deactivate the automatic central locking
For information on manual unlocking of the gear
selector lever, see (୴ page 400).
1
Cover on right side of front bumper
(୴ page 116).
To remove cover:
̈
Press mark on cover 1 in direction of
arrow.
̈
Lift cover off to reveal the threaded
hole for towing eye bolt.
426
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS63 AMG, Mercedes-Benz W219 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)