Operation
Tires and wheels
Restarting the Run Flat Indicator
̈ Switch on the ignition (୴ page 38).
Warning!
G
The tire inflation pressure monitor must be
restarted in the following situations:
Make sure the standard display menu
appears in the multifunction display
The Run Flat Indicator does not provide a
warning for wrongly selected tire inflation
pressures. Always adjust tire inflation pres-
sure according to the Tire and Loading Infor-
mation placard on the driver’s door B-pillar
(
୴ page 139).
ț
If you have changed the tire inflation
pressure
̈ Press button k or j repeatedly
until the following message appears in
the multifunction display:
Run Flat Indicator
Active
Menu: R-Button
ț
ț
If you have replaced the wheels or tires
If you have installed new wheels or
tires
(୴ page 296) or, if available, on the tire in-
flation pressure label located on the inside
of the fuel filler flap.
̈
Using the Tire and Loading Information
placard on the driver’s door B-pillar or,
if available, the tire inflation pressure
label on the inside of the fuel filler flap,
make sure the tire inflation pressure of
all four tires is correct.
The Run Flat Indicator does not replace reg-
ular checks of the tire inflation pressures
since a gradual pressure loss in more than
one tire cannot be detected by the Run Flat
Indicator.
Press the reset button (୴ page 27).
̈
The following message will appear in
the multifunction display:
Restart
Run Flat Indicator?
The Run Flat Indicator is not able to issue a
warning due to a sudden dramatic loss of
tire inflation pressure (e.g. tire blowout
caused by a foreign object). In this case
bring the vehicle to a halt by carefully apply-
ing the brakes and avoiding abrupt steering
maneuvers.
G
Cancel
Yes
Warning!
If you wish to confirm activation:
The Run Flat Indicator can only warn you in
a reliable manner if you have set the correct
tire inflation pressures for each tire.
̈ Press button æ.
The following message will appear in
the multifunction display:
Run Flat Indicator
If an incorrect tire inflation pressure was
set, the system will monitor the pressure ac-
cording to the incorrect value.
Restarted
୴୴
305
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS63 AMG, Mercedes-Benz W219 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)