Operation
Tires and wheels
i Restart the TPMS after adjusting the tire in- ̈ Press the reset button (୴ page 27).
Checking tire inflation pressure elec-
tronically with the Advanced Tire Pres-
sure Monitoring System* (Advanced
TPMS*), (Canada only)
flation pressure to the inflation pressure recom-
The following message will appear in
mended for the vehicle operating condition. Tire
the multifunction display:
Restart
pressure should only be adjusted on cold tires.
Observe the recommended tire inflation pres-
sure on the Tire and Loading Information placard
on the driver’s door B-pillar (୴ page 296). Some
vehicles may have supplemental tire inflation
pressure information for driving at high speeds
tire pressure
monitor?
Cancel
i This device complies with RSS-210 of Indus-
try Canada. Operation is subject to the following
two conditions:
Yes
(1) This device may not cause interference, and
(
୴ page 302) or for vehicle loads less than the
maximum loaded vehicle condition
୴ page 302). If such information is provided, it
can be found on the inside of the fuel filler flap
୴ page 283).
̈ Press the æ button.
(2)
this device must accept any interference re-
ceived, including interference that may
cause undesired operation of the device.
(
The following message will appear in
the multifunction display:
Tire Pressure
Monitor
Restarted
(
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
̈
̈
Switch on the ignition (୴ page 38).
Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display menu ap-
pears in the multifunction display
The TPMS only functions on wheels that
are equipped with the proper electronic
sensors. It monitors the tire inflation pres-
sure, as selected by the driver, in all four
tires. A warning is issued to alert you to a
decrease in pressure in one or more of the
tires.
After driving a few minutes the current
tire inflation pressure values are ac-
cepted as reference pressures and
then monitored.
(
୴ page 139).
̈
Press the j or k button repeat-
edly until you see the flowing message:
Tire Pressure
If you wish to cancel activation:
̈
Press the ç button.
Monitor Active
Menu: R-Button
309
Product Specification
Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CLS63 AMG, Mercedes-Benz W219 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |