204_AKB;
d2ureepe,
3; 69, en-US
2009-05-11T16:20:59+02:00 - Seite 201
Version: 2.11.8.1
Panorama roof with power tilt/sliding panel
201
i When the tilt/sliding panel is open,
resonance noises may result in addition to
the usual wind noises. They are caused by
closing the tilt/sliding panel without
automatic reversal function.
minimal pressure changes in the passenger If the movement of the tilt/sliding panel is
compartment. To reduce or eliminate these blocked during the closing procedure (e.g. by
noises, change the position of the tilt/
sliding panel or open a window slightly.
ice or pollution), the tilt/sliding panel will stop
and open slightly.
X Immediately after the tilt/sliding panel has
stopped and opened because it was
blocked, pull and hold the roof panel switch
in direction of arrow= until the tilt/sliding
panel is fully closed.
Raising
X Raising manually: Press and hold the roof
panel switch to the resistance point in
direction of arrow:.
X Release the roof panel switch when the
desired position is reached.
If the tilt/sliding panel is blocked again and
opens slightly:
X Express operation: To raise the tilt/
sliding panel completely, press the roof
panel switch past the resistance point in
direction of arrow: and release.
X Stopping during express operation:
Move the roof panel switch in any direction.
X Immediately after the tilt/sliding panel was
blocked and has opened, pull and hold the
roof panel switch in direction of arrow=
until the tilt/sliding panel is fully closed.
The tilt sliding panel closes without
automatic reversal function.
G Warning!
i Express raising is not available when the
tilt/sliding panel is open. The tilt/sliding
panel must be closed first.
Pulling and holding the roof panel switch to
close the tilt/sliding panel immediately after
it had been blocked two times will cause the
tilt/sliding panel to close without any reversal
function for as long as you hold the roof panel
switch.
Closing
X Closing manually: Pull and hold the roof
panel switch to the resistance point in
direction of arrow=.
X Release the roof panel switch when the
desired position is reached.
Synchronizing
X Express operation: To close the tilt/
sliding panel completely, pull the roof panel
switch past the resistance point in
direction of arrow= and release.
The tilt/sliding panel and front roller
sunblinds must be synchronized after a
malfunction or if the tilt/sliding panel does
not open smoothly.
X Stopping during express operation:
!
Do not attempt to open the tilt/sliding
Move the roof panel switch in any direction.
panel before the tilt/sliding panel is
properly synchronized. The tilt/sliding
panel could otherwise lock-up in the open
position.
If the tilt/sliding panel cannot be closed or
synchronized, contact an authorized
Mercedes-Benz Center or call Roadside
Assistance.
Closing when the tilt/sliding panel is
blocked
G Warning!
Make sure that nobody can become trapped
and be seriously or even fatally injured when
Z
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C250, Mercedes-Benz C300, Mercedes-Benz C350, Mercedes-Benz C63 AMG, Mercedes-Benz W204 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.67 out of 5)
Automotive readers have rated 2010 Mercedes-Benz C-Class Operators Manual C250 C300 4MATIC C350 Sport C63 AMG 4.7 out of 5.0 based on 3 product reviews. Really enjoy the ride though it’s my first Mercedes car . Have used other cars like VW touareg , Audi and Bmw but never owned a Mercedes so it’s exciting for me
it is very good
really excellent
Great