204_AKB;
d2ureepe,
3; 69, en-US
2009-05-11T16:20:59+02:00 - Seite 97
Version: 2.11.8.1
Wipers
97
the presence of water sprayed on the
windshield, and windshield wipers may be
damaged as a result.
Wiping with washer fluid
X Press the combination switch in direction
of arrowB past the resistance point.
The windshield wipers operate with washer
fluid.
!
Vehicles with rain sensor: If you have set
intermittent wiping, dirt on the surface of
the rain sensor or optical effects may cause
the windshield wipers to wipe in an
undesired fashion. This could then damage
the windshield wiper blades or scratch the
windshield. You should therefore switch off
the windshield wipers when weather
conditions are dry.
i To prevent smears on the windshield or
noisy/chattering wiper blades, wipe with
washer fluid every now and then even when
it is raining.
For information on filling up the washer
reservoir, see “Washer system and headlamp
cleaning system” (Y page 228).
For information on cleaning the headlamps
with washer fluid, see “Headlamp cleaning
system” (Y page 93).
Vehicles with rain sensor: Intermittent wiping
interval is dependent on the wetness of the
windshield. After the initial wipe, pauses
between wipes are controlled by the rain
sensor automatically.
X Turn the combination switch to position
Ä orÅ.
Intermittent wiping starts with selected
wiping interval.
Intermittent wiping is interrupted when the
vehicle is at a standstill and a front door is
opened. This protects persons getting into or
out of the vehicle from being sprayed.
Problems with wipers
!
If anything blocks the windshield wipers
(leaves, snow, etc.), switch them off
immediately.
For safety reasons, do the following before
attempting to remove any blockage:
RStop the vehicle in a safe location.
Intermittent wiping will be continued when all
doors are closed and
Rthe clutch pedal is depressed (vehicles with
manual transmission)
RRemove the SmartKey from the starter
switch.
or
RTurn off the engine by pressing the
KEYLESS-GO start/stop button and
open the driver’s door (with the driver’s
door open, starter switch is in position
or
Rthe automatic transmission is in drive
position D or reverse gear R (vehicles with
automatic transmission)
0
, same as with SmartKey removed from
or
starter switch).
Rthe wiper setting is changed using the
combination switch
REngage the parking brake.
RRemove blockage.
RTurn the windshield wipers on again.
Single wipe
X Press the combination switch briefly in
direction of arrowB to the resistance
point.
The windshield wipers wipe one time
without washer fluid.
Z
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C250, Mercedes-Benz C300, Mercedes-Benz C350, Mercedes-Benz C63 AMG, Mercedes-Benz W204 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.67 out of 5)
Automotive readers have rated 2010 Mercedes-Benz C-Class Operators Manual C250 C300 4MATIC C350 Sport C63 AMG 4.7 out of 5.0 based on 3 product reviews. Really enjoy the ride though it’s my first Mercedes car . Have used other cars like VW touareg , Audi and Bmw but never owned a Mercedes so it’s exciting for me
it is very good
really excellent
Great