6.
7.
Remove the bulb and replace it.
1.
Insert the screwdriver from the tool kit, with
the flat side facing outward, past the removal
hook and onto the clip, arrow 1.
Proceed in reverse order to insert the front
fog lamp. Note the guide rails in doing so.
Turn signal
The turn signals are located next to each low
beam in the engine compartment.
21-watt
bulb, PY 21W
1.
2.
Open the hood, refer to page 215.
Unscrew the cap counterclockwise and re‐
move it carefully.
The bulb is attached to the cap.
2.
3.
Turn the screwdriver by 90°, arrow 2.
Press the removal hook upward, arrow, and
remove the front fog lamp from the front us‐
ing the hook.
3.
4.
Turn the bulb clockwise to remove it.
Insert the new bulb and attach the cover in
the reverse order.
4.
Detach the connector.
Lateral turn signals
Follow the general instructions on lamps and
bulbs, refer to page 221.
These lamps are made using LED technology.
Please contact your service center in the event
of a malfunction.
5.
Turn the bulb bracket and remove it.
224
Online Edition for Part no. 01 40 2 606 190 - 12 10 500
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW F25, BMW X3 xDrive28, BMW X3 xDrive35 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)