Display on the Control Display
System limits
Check the traffic situation as well
Switching on the backup camera via
iDrive
Check the traffic situation around the ve‐
hiclewithyourowneyes. Otherwise, anaccident
could result from road users or objects located
outside the picture area of the backup camera.◀
With PDC activated:
"Rear view camera"
The backup camera image is displayed. The set‐
ting is stored for the remote control currently in
use.
Detection of objects
High, protruding objects such as ledges
may not be detected by the backup camera.◀
Malfunction
Switching on automatically
A Check Control message, refer to page 74, is
displayed in the instrument cluster.
Select transmission position R with the engine
running.
The backup camera image is displayed if the
system was switched on via the iDrive.
Switching off automatically
The system switches off and the LED goes out:
▷
After approx. 33 ft/10 m when driving for‐
ward.
▷
Above approx. 9 mph/15 km/h when driving
forward.
On the Control Display, the areas in front of and
behind the vehicle are shaded. PDC has failed.
Have the system checked.
Switch on the system again if necessary.
To ensure full operability:
Switching on/off manually
▷
▷
Keep the sensors clean and free of ice.
When using high-pressure washers, do not
spray the sensors for long periods and main‐
tain a distance of at least 12 in/30 cm.
Backup camera*
The concept
Thebackupcameraprovidesassistanceinpark‐
ing and maneuvering backwards. The area be‐
hind the vehicle is shown on the Control Display.
Press the button.
▷
▷
On: the LED lights up.
Off: the LED goes out.
The PDC is shown on the Control Display.
Switch on the backup camera via the iDrive, refer
to page 97.
95
Online Edition for Part no. 01 40 2 606 190 - 12 10 500
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW F25, BMW X3 xDrive28, BMW X3 xDrive35 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)