To clean the rear window, press the lever further
forward.
Otherwise, there is the danger of fire and a risk
to personal safety if the fluid is spilled.◀
Fold-out position of the wipers
Required when changing the wiper blades or
under frosty conditions, for example.
1.
2.
Switch off the ignition.
Under frosty conditions, ensure that the
wiper blades are not frozen onto the wind‐
shield.
3.
Press the wiper lever up beyond the point of
resistance and hold it for approx. 3 seconds,
until the wiper remains in a nearly vertical
position.
All washer nozzles are supplied from one reser‐
voir.
Fill with water and – if required – with a washer
antifreeze, according to the manufacturer's rec‐
ommendations.
After the wipers are folded back down, the wiper
system must be reactivated.
Mix the washer fluid before adding to maintain
the correct mixing ratio.
Fold the wipers back down
Before switching the ignition on, fold the
wipers back down to the windshield; otherwise,
the wipers may become damaged when they are
switched on.◀
Capacity
Approx. 5.3 US quarts/ 5 liters
1.
2.
Switch on the ignition.
Automatic transmission with
Steptronic*
Press the wiper levers down. The wipers
move to their resting position and are ready
for operation.
Transmission positions
Washer fluid
D Drive, automatic position
Position for normal vehicle operation. All for‐
ward gears are available.
General information
Antifreeze for washer fluid
R is Reverse
Antifreeze is flammable. Therefore, keep
it away from sources of ignition.
Select only when the vehicle is stationary.
Only keep it in the closed original container and
inaccessible to children.
N is Neutral
Use in automatic car washes, for example. The
vehicle can roll.
Follow the instructions on the container.◀
When the ignition is switched off, refer to
page 58, position P is engaged automatically.
Washer fluid reservoir
Adding washer fluid
P Park
Only add washer fluid when the engine is
cool, and then close the cover completely to
avoid contact between the washer fluid and hot
engine parts.
Select only when the vehicle is stationary. The
drive wheels are blocked.
P is engaged automatically:
64
Online Edition for Part no. 01 40 2 606 190 - 12 10 500
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW F25, BMW X3 xDrive28, BMW X3 xDrive35 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)