Activating the assistance functions
Camera
More than one assistance function can be active
at the same time.
Showing the parking aid lines
"Parking aid lines"
Pathway and turning circle lines are displayed.
Showing the obstacle marking
"Obstacle marking"
The camera lens is located in the handle of the
tailgate. The image quality may be impaired by
dirt.
Spatially-shaped markings are displayed.
Display on the Control Display
Clean the lens, refer to page 235.
Switching on the backup camera via
iDrive
Top View*
With PDC activated:
"Rear view camera"
The concept
The backup camera image is displayed. The set‐
ting is stored for the remote control currently in
use.
Top View assists you in parking and maneuver‐
ing. The area around the doors and the road area
around the vehicle are shown on the Control
Display for this purpose.
Brightness
With the backup camera switched on:
Capturing the image
1.
2.
Select the symbol.
The image is captured by two cameras
integrated in the exterior mirrors and by the
backup camera.
Turn the controller until the desired setting
is reached and press the controller.
The range is approx. 7 ft/2 m to the side and rear.
Contrast
In this way, obstacles up to the height of the ex‐
terior mirrors are detected early.
With the backup camera switched on:
1.
2.
Select the symbol.
System limits
Turn the controller until the desired setting
is reached and press the controller.
Top View cannot be used in the following situa‐
tions:
▷
▷
▷
▷
With a door open.
With the tailgate open.
With an exterior mirror folded in.
In poor light.
A Check Control message is displayed in some
of these situations.
97
Online Edition for Part no. 01 40 2 606 190 - 12 10 500
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW F25, BMW X3 xDrive28, BMW X3 xDrive35 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)