Backrest width*
LATCH child restraint fixing
system
Before installing a child restraint fixing system in
the front passenger seat, open the backrest
width completely. Do not change the backrest
width again and do not call up a memory posi‐
tion.
LATCH: Lower Anchors and Tether for CHil‐
dren.
Note
Backrest width for the child seat
Manufacturer's information for LATCH
child restraint fixing systems
Before installing a child restraint fixing
system in the front passenger seat, the backrest
width must be opened completely. Do not
change the adjustment after this; otherwise, the
stability of the child seat will be reduced.◀
To mount and use the LATCH child restraint fix‐
ing systems, observe the operating and safety
information from the system manufacturer; oth‐
erwise, the level of protection may be reduced.◀
Child seat security
Mounts for the lower LATCH anchors
Correctly engage the lower LATCH an‐
chors
Make sure that the lower LATCH anchors have
properly engaged and that the child restraint fix‐
ing system is resting snugly against the back‐
rest; otherwise, the degree of protection offered
may be reduced.◀
Before mounting the LATCH child restraint fix‐
ing system, pull the belt away from the child re‐
straint fixing system.
The rear safety belts and the front passenger
safety belt can be locked against pulling out for
mounting the child restraint fixing systems.
Locking the safety belt
1.
2.
Pull out the belt webbing completely.
Secure the child restraint fixing system with
the belt.
3.
Allow the belt webbing to be pulled in and
pull it taut against the child restraint fixing
system. The safety belt is locked.
Mounts for the lower LATCH anchors are lo‐
cated in the gap between the seat and backrest.
Unlocking the safety belt
1.
2.
3.
Unbuckle the belt buckle.
Mounting LATCH child restraint fixing
systems
Remove the child restraint fixing system.
Allow the belt webbing to be pulled in com‐
pletely.
1.
Mount the child restraint fixing system; refer
to the operating instructions of the system.
2.
Ensure that both LATCH anchors are prop‐
erly connected.
56
Online Edition for Part no. 01 40 2 606 190 - 12 10 500
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW F25, BMW X3 xDrive28, BMW X3 xDrive35 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)