Adjusting the height: outer head
restraints
Seat and mirror memory*
General information
▷
▷
To raise: pull.
To lower: press the button, arrow 1, and
push the head restraint down.
Two different driver's seat and exterior mirror
positions can be stored and retrieved for each
remote control. Settings for the backrest width
and lumbar support are not stored in memory.
Removing
Only remove the head restraint if no one will be
sitting in the seat in question.
Storing
1.
2.
Switch on the ignition.
Set the desired position.
3.
4.
Press the button. The LED in the
button lights up.
Press the desired button 1 or 2. The LED
goes out.
If the M button is pressed accidentally:
Press the button again.
1.
2.
Pull the head restraint upward as far as pos‐
sible.
The LED goes out.
Press the button, arrow 1, and pull the head
restraint out completely.
Calling up settings
Do not retrieve the memory while driving
Before transporting passengers
Do not retrieve the memory setting while
driving, as an unexpected movement of the seat
or steering wheel could result in an accident.◀
Reinstall the head restraint before trans‐
porting anyone in the seat; otherwise, the pro‐
tective function of the head restraint is unavail‐
able.◀
Comfort function
1.
2.
3.
Open the driver's door.
Switch off the ignition.
Briefly press the desired button 1 or 2.
The corresponding seat position is performed
automatically.
The procedure stops when a switch for adjust‐
ing the seat or one of the buttons is pressed.
52
Online Edition for Part no. 01 40 2 606 190 - 12 10 500
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW F25, BMW X3 xDrive28, BMW X3 xDrive35 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)