Wheel changing
USING WHEEL CHOCKS
JACKING POINTS AND JACK TYPE
AIR SUSPENSION
Always chock the wheels using
suitable wheel chocks. Place the
chocks on both sides of the wheel
diagonally opposite the wheel to be
changed.
Only jack the vehicle using the jacking
points described, or damage to the
vehicle could occur.
Note: Your vehicle may be fitted with a tilt
sensor which activates the alarm if the vehicle
is tilted in any direction after it has been locked.
To lock the doors while changing the wheel,
and avoid the alarm activating, turn off the
alarm sensors in the vehicle set-up menu. See
If jacking the vehicle on a slight slope
is unavoidable, place the chocks on
the downhill side of both wheels on
the axle not being raised.
52,
INTERACTIVE CONTROLS.
Wheel chocks are stowed in the tool kit.
1.
Remove the chocks from the tool kit and
lift the folded section (A) to assemble
chock.
2.
3.
Lift support section (B) of chock until it
locks into place.
Position the vehicle on level ground.
Both chocks must be used. Position them
on opposite sides of the wheel and fully
push them home against the tyre.
222
| Categories | Land Rover, Land Rover Discovery 4 |
|---|---|
| Tags | Land Rover |
| Model Year | 2012 |
| Download File |
|
| Language | Bulgarian, English |
| Product Name | Discovery 4 Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)