Wheel changing
4.
5.
Continue to wind up, until the mechanism
reaches its upper position. This is indicated
by clear physical jerk from the wheel nut
brace and an audible noise.
Check that the wheel has returned to the
same position as the spare wheel was in
before it was removed. If in any doubt,
lower the winch slightly, adjust the wheel
position and repeat step 4.
The wheel must be securely retained in its
correct position by the winch mechanism,
or it could become loose.
6.
Replace the locking cap over the wheel
hoist nut. As the underside of the cap is
exposed to the same conditions as the
underside of the vehicle, ensure that it is
firmly in place.
Note: If for any reason, the spare wheel is not
to be fitted back in its hoist, the wheel hoist
should be rewound as follows.
Position the lifting lug level on the cable, and
wind up the hoist mechanism until it reaches
its uppermost position. This is indicated by a
clear physical jerk from the wheel nut brace
and an audible noise.
227
| Categories | Land Rover, Land Rover Discovery 4 |
|---|---|
| Tags | Land Rover |
| Model Year | 2012 |
| Download File |
|
| Language | Bulgarian, English |
| Product Name | Discovery 4 Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)