Starting the engine
IF THE ENGINE FAILS TO START
Note: If the engine fails to crank when the
START/STOP button is pressed, and there has
been a recent collision, the fuel system inertia
switch may have been tripped. Seek qualified
assistance.
Petrol engines: If the engine persistently fails
to start, make sure the transmission is in P and
press the START/STOP button (without
applying the brake pedal) to switch on the
ignition. Slowly depress the accelerator pedal
fully, then hold it in the fully down position and
press the START/STOP button with the brake
pedal applied. The engine will then begin to
crank. Release the accelerator pedal when the
engine starts.
Position the Smart Key against the underside
of the steering column cover with the buttons
facing downwards.
If the engine fails to crank, or fails to start,
consult your Dealer/Authorised Repairer.
Note: There are markings on the cover to help
locate the correct position.
Diesel engines: If the engine persistently fails
to start, make sure the transmission is in P
then press the START/STOP button (with the
brake pedal applied). Keep the START/STOP
button and the brake pedal pressed until the
engine starts, then release.
When the Smart Key is positioned in this area,
it will be recognised by the vehicle and the
message Smart Key Recognised will be
displayed in the message centre.
Holding the Smart Key in position and the
brake pedal depressed, press the START/STOP
button to start the engine.
If the engine still fails to crank, or fails to start
consult your Dealer/Authorised Repairer.
Once the engine has been started, you no
longer need to hold the Smart Key against the
steering column cover.
If the vehicle has been unlocked using the
emergency key blade or the Smart Key is not
detected by the vehicle, it will be necessary to
use the keyless start backup to disarm the
alarm and start the engine.
Note: If the Smart Key is not recognised or the
engine still fails to start, consult your
Dealer/Authorised Repairer
The keyless start backup can only be used
when the message Smart Key Not Found Place
As Shown is displayed in the message centre.
SWITCHING OFF THE ENGINE
Never stop the engine when the
vehicle is in motion.
Before stopping the engine, ensure that the
vehicle is parked safely with the parking brake
applied and the gear selector set to P.
79
| Categories | Land Rover, Land Rover Discovery 4 |
|---|---|
| Tags | Land Rover |
| Model Year | 2012 |
| Download File |
|
| Language | Bulgarian, English |
| Product Name | Discovery 4 Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)