Wipers and washers
The intermittent delay period can be adjusted
via the collar (1), but will also reduce
automatically as vehicle speed increases.
This feature can be enabled or
disabled by your
Dealer/Authorised Repairer.
RAIN SENSOR
Ensure that the wipers are switched off
before entering a car wash. If the rain
sensitive wipers operate during the car
washing process, damage may occur to
the wiper mechanism.
The rain sensor is able to detect the presence
and amount of rain/dirt/snow on the
windscreen and automatically activates the
windscreen wipers accordingly. Static droplets
may not be detected on initial start-up, use a
single wipe to clear the screen.
To activate the rain sensitivity wipers, move the
wiper stalk to the rain sensor position (4) and
adjust the rain sensitivity control (1) as
required. When rain sensitive wipers are
activated and when sensitivity is increased, a
single wipe will operate.
HEADLAMP WASHERS
If the headlamps are on, and there is sufficient
liquid in the washer reservoir, operating the
screen wash will also power-wash the
headlamps.
The headlamp power wash will operate on
every fifth operation of the screen washer,
provided the headlamps are still switched on
and approximately 10 minutes have elapsed
since the last headlamp wash.
Switching the headlamps or ignition off and
back on again, will reset the cycle.
Note: The headlamp washers are inhibited
when the washer fluid reservoir level is low.
44
| Categories | Land Rover, Land Rover Discovery 4 |
|---|---|
| Tags | Land Rover |
| Model Year | 2012 |
| Download File |
|
| Language | Bulgarian, English |
| Product Name | Discovery 4 Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)