Load carrying
2
. The loadspace cover can be fitted in two
positions. The foremost fitting is close
behind the second row of seats; the
rearmost is behind where the third row of
seats are/would be fitted
When fitting the loadspace cover in
position, ensure that the paddle
returns to the flush (horizontal)
position. Failure to do so may allow
the loadspace cover to move during an
accident or sudden maneuver.
3.
To retract the loadspace cover, disengage
the ends from the recessed areas and allow
the soft portion of the cover to retract into
its housing. Fold the rigid portion back
under the unit and press to clip in place.
Do not store the loadspace cover
loose in the vehicle. During an
accident or sudden maneuver, the
load space cover could cause serious
injury or death.
4.
In the 7 seat vehicle only, the loadspace
cover may be stowed behind the second
row seats when not in use. See 19,
LUGGAGE ANCHOR POINTS
FOLDING THE SEATS (7 seat vehicle) for
more details of loadspace cover stowage.
Never place the loadspace cover
behind the second row of seats, if
the third row is to be occupied.
Remove the stowed loadspace
cover before moving the seats.
Do not attempt to raise the second
row seats into the upright position,
or tip them forward for third row
access, while the loadspace cover
is stowed behind the second row,
as damage will result.
In 5 seat vehicles, the cover must be
removed from the vehicle altogether if not
in use.
To assist in safely securing large items of
luggage, four fixing points are located in the
rear loadspace floor.
5
. To remove the loadspace cover, first pull
up the paddle at the right hand end of the
cover.
All items carried in the loadspace
area should be properly secured. If
the vehicle is involved in an accident,
subject to sudden braking or change of
direction, loose items can cause
serious injury.
6.
Lift the right hand end of the unit and pull
away from the left hand side.
Note: It is easier to remove/refit the loadspace
cover if the second row seat backs have been
tipped forward.
Note: A range of approved luggage retention
accessories are available from your Land Rover
Dealer/Authorised Repairer.
Note: Installation of the loadspace cover is the
reverse of removal.
69
| Categories | Land Rover, Land Rover Discovery 4 |
|---|---|
| Tags | Land Rover |
| Model Year | 2012 |
| Download File |
|
| Language | Bulgarian, English |
| Product Name | Discovery 4 Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)