R
Gearbox
3.
4.
Press the selector down and rotate to S to
select Sport mode.
S will appear in the instrument panel and
the LED by the selector will illuminate.
Do not rev the engine, or allow it to run
above normal idle speed, while selecting
D or R, or while the vehicle is stationary
with any gear selected.
Manual gear selection (CommandShift™)
can be used when Sport (S) is selected.
Use the paddles on the steering wheel for
gear selection. Pull the left paddle (-) for
down-shifts and the right paddle (+) for
up-shifts. To return to the fully automatic
sport mode, pull the right paddle for 2
seconds.
While the transmission is set to
permanent manual mode (i.e., using the
paddles to change gear while in Sport
mode) and Dynamic mode is selected,
transmission up-shifts are fully
controlled by the driver. This means that
the transmission will not change up a
gear automatically, even if the engine
rev limit is reached.
To return to drive mode move the selector
back to the D position.
5.
Press the Lo button to select low range
gears.
Low range gears should only be used in
situations where low speed manoeuvring is
necessary, including more extreme off-road
conditions. Do not attempt to use low range
gears for normal road driving.
Do not allow the vehicle to remain
stationary for a sustained period, with a
gear selected and the engine running.
Always select P or N if the engine is to
idle for a prolonged period.
P should normally be selected before switching
off the engine. If any other gear is selected at
turn off, the selector will move to P before
retracting into the centre console.
If the vehicle detects a transmission system
fault, a warning message will be displayed in
the Message centre and only limited gears may
become available. Seek qualified assistance
immediately.
If the engine is switched off with N selected, the
system will wait for 10 minutes before selecting
P. This time delay allows the vehicle enough
time to be conveyed through a carwash.
Park (P) should be engaged and the
parking brake applied when the vehicle
is stationary.
If the selector fails to rotate to P when the
engine is switched off, when the engine is next
switched on, P must be selected before the
engine will start.
Always select P and switch off the
ignition before leaving the vehicle.
In the event of a vehicle breakdown, the
transmission will automatically select P. This
prevents the vehicle from being towed on all 4
wheels. Therefore, vehicle recovery should only
be undertaken by suitably qualified personnel.
Never select P while the vehicle is in
motion.
Never select Reverse (R) while the
vehicle is in forward motion.
Never select a forward gear while the
vehicle is in rearward motion.
111
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2014-2015 Land Rover Range Rover Handbook Manual 3.0 out of 3.0 based on 1 product reviews. I stopped to buy fuel. On shifting to D to move, my range rover could not move, but low gear light continued to blink. The low gear button remained stiff. What is wrong?