L
Gearbox
If the rotary selector is obstructed, remove the
obstruction and then start the engine. The
selector should elevate as normal. If the selector
fails to elevate, it can be used in the lowered
position, but be aware that it will not
automatically select P when the engine is
switched off. P should be selected manually.
The fault should be rectified by a
HILL DESCENT
With Hill Descent Control (HDC) selected in
either Drive (D), Sport (S) or manual gear
selection (CommandShift™) modes, a low gear
will be selected and maintained to provide
maximum engine braking. Should the selector
be moved to Drive (D) from the Sport (S) mode
or if CommandShift™ is deactivated, the
selected gear will be retained until the descent
is completed. See 144, HDC CONTROLS.
Dealer/Authorised Repairer at the earliest
opportunity.
MANUAL GEAR SELECTION
STATIONARY RANGE CHANGING
When Drive (D) is selected, manual mode may
be temporarily accessed by operating the
steering wheel mounted shift paddles.
With the vehicle stationary and the engine
running, select Neutral (N).
Press the Lo range button and release. The
range change status will be confirmed after
several seconds.
While in Drive (D) temporary manual mode will
be held while the driver is accelerating,
decelerating, cornering or continuing to request
shifts via the paddles. Temporary manual mode
will be deactivated if the engine is over-revved
or laboured, to prevent transmission and/or
engine damage.
RANGE CHANGE INDICATORS
While the Hi range transmission is in use, no
range indicators are illuminated. See 52, LOW
RANGE (GREEN)
If continued use of manual mode is required,
select Sport (S), to activate permanent manual
mode. Permanent manual mode will be
deactivated if the engine is over-revved or
laboured, to prevent transmission and/or engine
damage.
While a range change is in progress, the
indicator lamps will flash as follows:
Hi to Lo change
•
The Lo range indicator lamps flash during
the change and then illuminate constantly.
Manual gear selection will be accompanied by
the gearshift indicator. See 52, GEAR SHIFT
(GREEN).
•
The message LOW RANGE SELECTED is
briefly displayed in the Message centre.
Lo to Hi change
•
•
•
The Lo range indicator lamps flash during
the change.
The Lo range indicator lamps extinguish
when the change is complete.
The message HIGH RANGE SELECTED is
briefly displayed in the Message centre.
112
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2014-2015 Land Rover Range Rover Handbook Manual 3.0 out of 3.0 based on 1 product reviews. I stopped to buy fuel. On shifting to D to move, my range rover could not move, but low gear light continued to blink. The low gear button remained stiff. What is wrong?