2014-2015 Land Rover Range Rover Handbook Manual

R
Adaptivecruisecontrol
3.
4.
5.
There may be issues with the detection of
vehicles in front when going into and
coming out of a bend.
Tyres other than those recommended for your
vehicle, may have different circumferences. This
can affect the correct operation of ACC.
When moving around a stationary vehicle.
This may cause uncertainty as to which
vehicle should be followed.
FORWARD ALERT FUNCTION
The system may not react to slow
moving vehicles.
When the vehicle ahead turns out of your
lane. This may cause uncertainty as to
which vehicle should be followed.
Forward alert uses the same radar
sensor as Adaptive cruise control. The
same performance limitations apply,
see 135, ADAPTIVE CRUISE CONTROL
OVERVIEW.
In these situations ACC may operate
unexpectedly. The driver should stay alert and
intervene if necessary.
ACC MALFUNCTION
Forward alert can be enabled/disabled via the
Message centre menu. See 46, INSTRUMENT
PANEL MENU.
If a fault occurs while ACC or Follow mode is
operational, ACC will switch off and cannot be
used until the fault is cleared. The message
DRIVER INTERVENE is displayed briefly in the
Message centre and is then replaced by the
message CRUISE NOT AVAILABLE.
Forward alert provides limited detection and
warning of objects close ahead while the vehicle
is moving forwards. See 52, FORWARD ALERT
(GREEN). If a vehicle or object ahead is within
the user defined sensitivity area, a warning tone
will sound and the FORWARD ALERT message
will be displayed in the Message centre.
Advanced emergency brake assist will be
activated. See 140, ADVANCED EMERGENCY
BRAKE ASSIST
If a fault with ACC or any related system occurs
at any other time, the message CRUISE NOT
AVAILABLE will be displayed. It will not be
possible to activate ACC in any mode.
Accumulations of dirt, snow or ice on the radar
sensor or cover may inhibit ACC operation.
Fitting of a vehicle front protector or metallised
badges may also affect ACC operation.
The driver must take appropriate action
immediately.
If this occurs in ACC cruise /Follow mode, the
audible alarm sounds and the message DRIVER
INTERVENE is displayed briefly. The message
RADAR SENSOR BLOCKED will then be
displayed.
Sensitivity of the function can be adjusted only
when Adaptive cruise control is disengaged.
Adjust as follows:
Using the steering wheel Adaptive cruise
control buttons, press the gap decrease
button to display the current setting in the
Message centre and then press again to
decrease the sensitivity of the alert.
Note: The same messages may also be
displayed while driving on open roads with few
objects for the radar to detect.
Clearing the obstruction allows the system to
return to normal operation. If the obstruction
is present when ACC is inactive (e.g. on initial
starting or with ACC switched off), the message
RADAR SENSOR BLOCKED will be displayed.
Press the gap increase button to display the
current setting in the Message centre and
then press again to increase the sensitivity
of the alert.
139
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year2014, 2015
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 309 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Handbook
Product BrandLand Rover
Applicable to CountryBulgaria, International
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(1 votes, average: 3 out of 3)
Automotive readers have rated 2014-2015 Land Rover Range Rover Handbook Manual 3.0 out of 3.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

2014-2015 Land Rover Range Rover Handbook Manual SKU UPC Model
Lawrence Uzo on Aug 06, 2015. Low to high gear.

I stopped to buy fuel. On shifting to D to move, my range rover could not move, but low gear light continued to blink. The low gear button remained stiff. What is wrong?