112
Chapter 3
B - FUNCTIONAL DESCRIPTION
The BSI calculates the total distance driven from the signal supplied by the
speed sensor. It then sends this to the control panel via the VAN network.
The control panel calculates the distance remaining to be travelled before the
next service using:
•
the maintenance frequency stored in the control panel (this is
decremented as miles are driven),
•
the time elapsed (incrementation of the number of days).
As soon as one of these parameters (time or remaining miles) becomes due,
the multifunction screen indicates that the servicing date has been exceeded
(the key flashes).
Note 1: When the time reaches one year, the maintenance indicator behaves
as if the distance remaining were zero (the "key" symbol flashes).
Note 2: If the battery is disconnected, the time is no longer incremented.
C - INITIALISING THE MAINTENANCE INDICATOR
The procedure is as follows:
1
2
- Press the left hand button (Tripometer reset button).
- Switch on the ignition.
The display shows a key and a 10 second counter starts to count down to 0.
3
- Keep the button pressed until 0 is reached then release it.
The maintenance indicator displays the mileage to be travelled before the next
service (it is equal to the maintenance frequency). The key disappears.
4
- Switch off the ignition to quit initialisation.
MULTIPLEXED BSI - XSARA PICASSO AND XSARA – PART 5
©
AUTOMOBILES CITROËN Toute reproduction ou traduction même partielle sans l'autorisation écrite d'AUTOMOBILES CITROËN est interdite et constitue une contrefaçon
| Categories | Citroën Manuals, Citroën Picasso Manuals, Citroën Xsara Manuals |
|---|---|
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)