DO-IT-YOURSELF MAINTENANCE
G030C01A-AAT
G030D01A-GAT
2.0
L (DOHC CVVT)
To Check the Oil Level
Adding Oil
DOHC
V6
DOHC
V6
HGK259
See the lubrication chart on the page 9-3.
HGK210
HGK211
Before checking the oil, warm up the engine to
the normal operating temperature and be sure it
is parked on level ground. Turn the engine off.
Wait five minutes, then remove the dipstick,
wipe it off, fully reinsert the dipstick and with-
draw it again. Then note the highest level the oil
has reached on the dipstick. It should be be-
tween the upper ("FULL") and lower ("LOW")
range.
If the oil level is close to or below the "L" mark,
add oil until it reaches the "F" mark. To add oil:
NOTE:
o
The use of a 5W-20 multi grade oil is not
recommended for sustained high speed
use.
1. Remove the oil filler cap by turning it counter-
clockwise.
2. Add oil, then check the level again. Do not
overfill.
3. Replace the cap by turning it clockwise.
o
When replacing or adding the oil, below
SAE 10W-30 is recommended.
Using a high viscosity oil of SAE 15W-40
and over makes malfunction of CVVT
engine when the engine is cool.
The distance between the "F" and "L" marks is
equal to about 1 liter of oil.
6-5
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)