DO-IT-YOURSELF MAINTENANCE
G260A02A-AAT
3. Disconnect the power cord from the bulb
base in the back of the headlight.
4. Remove the dust cover.
5. Push the bulb spring for removing the head-
light bulb.
6. Remove the protective cap from the re-
placement bulb and install the new bulb by
matching the plastic base with the headlight
hole. Install the dust cover after retightening
the bulb spring and reconnect the power
cord.
G290A02GK-GAT
REPLACING LIGHT BULBS
Before attempting to replace a headlight bulb,
be sure the switch is turned to the "OFF"
position.
The next paragraph shows how to reach head-
light bulbs so they may be changed. Be sure to
replace the burned-out bulb with one of the
same number and wattage rating.
HEADLIGHT AIMING ADJUSTMENT
Low Beam
Horizontal
aiming
CAUTION:
Keep the lamps out of contact with petro-
leum products such as oil, gasoline etc.
Verticalaiming
7. Use the protective cap and carton to dis-
pose of the old bulb.
8.
Check for proper headlight aim.
G290A01GK
G270A02A-GAT
HEADLIGHT BULB
WARNING:
High Beam
The halogen bulb contains gas under pres-
sure and if impacted could shatter, resulting
in flying fragments. Always wear eye pro-
tection when servicing the bulb. Protect the
bulb against abrasions or scratches and
against liquids when lighted. Turn the bulb
on only when installed in a headlight. Re-
place the headlight if damaged or cracked.
Keep the bulb out of the reach of children
and dispose of the used bulb with care.
Vertical
aiming
Replacement instructions:
Horizontal
aiming
Turn signal Light
G290A02GK
Before performing aiming adjustment, make sure
of the following.
Low Beam
High Beam
HGK225
1.
2.
Allow the bulb to cool. Wear eye protection.
Always grasp the bulb by its plastic base,
avoid touching the glass.
6-20
Product Specification
Categories | Hyundai Manuals, Hyundai Coupe Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Coupe |
Document File Type | |
Copyright | Attribution Non-commercial |