WHAT TO DO IN AN EMERGENCY
D060G01A-AAT
7. Changing Wheels
D060H01A-AAT
8. Reinstall Wheel Nuts
D060G02HP
WARNING:
D060G01HP
D060H01HP
Wheelcoversmayhavesharpedges.Handle
them carefully to avoid possible severe in-
jury.
Use the wrench to loosen the wheel nuts, then
remove them with your fingers. Remove the
wheel cover (if installed) from the wheel and
slide the wheel off the studs and lay it flat so it
cannot roll away. To put the wheel on the hub,
pick up the spare tire, line up the holes with the
studs and slide the wheel onto them. If this is
difficult,tipthewheelslightlyandgetthetophole
inthewheellinedupwiththetopstud.Thenjiggle
the wheel back and forth until the wheel can be
slid over the other studs.
Toreinstallthewheelcover,holditonthewheel
and put the wheel nuts on the studs and tighten
them finger tight. The nuts should be installed
with their small diameter ends directed inward.
Jiggle the tire to be sure it is completely seated,
then tighten the nuts with your fingers again.
Before putting the wheel into place, be sure
that there is nothing on the hub or wheel
(suchasmud,tar,gravel,etc.)thatinterferes
withthewheelfromfittingsolidlyagainstthe
hub. If there is, remove it. If there is not good
contactonthemountingsurfacebetweenthe
wheel and hub, the wheel nuts could come
loose and cause the loss of a wheel. Loss of
a wheel may result in loss of control of the
vehicle. This may cause serious injury or
death.
3-8
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)