DO-IT-YOURSELF MAINTENANCE
anymore than 8.0 mm. If you have the instru-
ments to check it with a force of 98N (22 lb.),
the deflection should be approx. 8.0 mm (0.315
inches). If the belt is too loose, have it adjusted
by your Hyundai dealer.
1. Open the glove box and take out the damper
strap from the hole.
NOTE:
The compressor drive belt tension for diesel
engine (2.9 CRDi only) is adjusted automati-
cally.
B760A06HP-1
B145A03HP-GAT
4. Remove the filter cover by pulling it.
CHANGING THE AIR CONDITIONER
B760A01HP
FILTER (For Evaporator and Blower
Unit) (If installed)
2.
Lower the glove box completely by pushing
the both sides of the glove box inward.
The air conditioner filter is located in front of the
evaporator unit behind the glove box. It helps to
the amount of decrease pollutants entering the
car.
groove
B760A07HP-1
5.
6.
Replace the two filters.
Installation is the reverse order of disassem-
bly.
B760A03HP-1
3.
Pull out the pin fixing the filter cover after
pushing it to the left and fix the pin to the
groove on the filter cover.
B760A02HP
6-16
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)