FEATURES OF YOUR HYUNDAI
H240B03O-AAT
FAD (Fader Control) Knob
6. PRESET STATION SELECT Button
Six(6)stationsforAM,FM1andFM2respective-
ly can be preset in the electronic memory circuit
on this unit.
1.
POWER ON-OFF Control Knob
Pull the treble control knob further out.
Turn the control knob counterclockwise to em-
phasizefrontspeakersound(rearspeakersound
willbeattenuated).
When the control knob is turned clockwise, rear
speakersoundwillbeemphasized(frontspeaker
sound will be attenuated).
Theradiounitmaybeoperatedwhentheignition
key is in the "ACC" or "ON" position. Press the
knobtoswitchthepoweron.TheLCDshowsthe
radio frequency in the radio mode or the tape
direction indicator in the tape mode. To switch
the power off, press the knob again.
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be pro-
grammedintothememoryoftheradio.Then,by
simply pressing the band select button and/or
one of the six station select buttons, you may
recallanyofthesestationsinstantly.Toprogram
the stations, follow these steps:
VOLUME Control
4.
Press the
TUNE (Manual) Select Button
side or
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise to re-
duce the volume.
side to increase or to
decreasethefrequency.Presseitherbuttonand
holddowntocontinuouslyscroll.Releasebutton
once the desired station is reached.
o
o
o
o
Press band selector to set the band for AM,
FM1, or FM2.
Select the desired station to be stored by
seek or manual tuning.
2.
BASS Control Knob
SEEK Operation (Automatic Channel
Press to pop the knob out and turn to the left or
right for the desired bass tone.
Selection)
Determine the preset station select button
you wish to use to access that station.
Press the station select button for more than
two seconds. A select button indicator will
show in the display indicating which select
button you have depressed. The frequency
display will flash after it has been stored into
the memory with a beep sound. You should
then release the button, and proceed to pro-
gram the next desired station. A total of 18
stationscanbeprogrammedbyselectingone
AM and two FM stations per button.
Press the TUNE select button 0.5 sec or more.
Releasing it will automatically tune to the next
available station with a beep sound.
BAL (Balance Control) Knob
Pull the bass control knob further out. Turn the
control knob clockwise to emphasize right
speaker sound (left speaker sound will be at-
tenuated).
When the control knob is turned counterclock-
wise, left speaker sound will be emphasized
(right speaker sound will be attenuated).
When the
second, releasing will automatically tune to the
next higher frequency and when the side is
side is pressed longer than 0.5
pressed longer than 0.5 second, releasing will
automatically tune to the next lower frequency.
5.
BAND Selector
3.
TREB (Treble Control) Knob
Pressing the FM/AM button changes the AM, FM1
andFM2bands.Themodeselectedisdisplayed
on LCD.
Press to pop the knob out and turn to the left or
right for the desired treble tone.
o
When completed, any preset station may be
recalled by selecting AM, FM1 or FM2 band
and the appropriate station button.
1-
83
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)