DO-IT-YOURSELF MAINTENANCE
G290B01HP-GAT
If the vehicle has had front body repair and the
headlight assembly has been replaced, the
headlight aiming should be checked using an
aiming screen as shown in the illustration. Turn
on the headlight switch. (Low Beam or High
Beam Position).
Adjustment After Headlight Assembly
Replacement
<Low Beam>
38
mm ( 1.5 in.)
W
Vertical
line
Horizontal line
14
mm (0.55 in.)
"
P"
1. Adjust headlights so that main axis of light is
parallel to center line of the body and is
aligned with point "P" shown in the illustra-
tion.
H
Cut-off line
2.
Dotted lines in the illustration show the cen-
ter of headlights.
Ground line
L
H
"H"
Horizontal center line of headlights from
ground :
Low Beam : 894 mm (35.1 in.)
High Beam : 839 mm (33 in.)
G290B01HP
<High Beam>
Horizontal line
Vertical
line
W
"P"
39
mm (1.54 in.)
"W"
21 mm
( 0.83 in.)
Distance between each headlight center :
Low Beam : 1,316 mm (51.8 in.)
High Beam : 1,076 mm (42.4 in.)
H
Cut-off line
Ground line
"L"
L
Distance between the headlights and the
wall that the lights are tested against :
Low Beam : 3,000 mm (118.11 in.)
High Beam : 3,000 mm (118.11in.)
H
G290B02HP
6-25
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)