IN CASE OF EMERGENCY
2
3
4
. Insert the spare wheel rod into the hole in
the upper pad of the rear bumper.
. Connect the wheel nut wrench to the spare
wheel rod.
. Turn the wheel nut wrench counterclock-
wise and the spare tyre will lower.
SD060A1-E
HPD070A1-E
IN THE EVENT OF A PUNCTURE
If a puncture occurs whilst driving the vehicle:
CHANGING A FLAT TYRE
1. Bring the car to rest as soon as it is safe to
do so and with the minimum amount of
braking required which will assist in main-
taining the maximum amount of control. The
vehicle should be parked wherever possible
upon firm level ground to facilitate wheel
changing.
2.
If the vehicle is creating a hazard and the
road conditions do not permit the wheel to
be changed safely, assistance should be
sought.
D060A01HP
It is of the utmost importance that care is
exercised when changing road wheels. Ensure
that the parking brake is set and that the gear
shift lever is in reverse (P, if the vehicle has
automatic transmission).
3.
Passengers must not be allowed to remain
inside the vehicle during wheel changing. If
a puncture occurs whilst the vehicle is on a
motorway, the passengers should take ref-
uge on the motorway embankment to avoid
the possibility of injury occurring should the
vehicle be struck by other motorway traffic.
Wheel changing should be performed ac-
cording to the following instructions.
D040B02HP
5.
Remove the lift plate from the centre of the
spare tyre after the spare tyre is lowered
completely.
4.
Installation is the reverse order of removal.
CAUTION:
When installing, turn the wheel nut wrench
clockwise till you hear the crackle once or
twice(Tightening torque : 3.87 kg m). And
make sure the spare tyre is secured in the
proper location.
3-4
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)