OWNER MAINTENANCE
G180A01A-GAT
YG200A1-E
Diesel
Engine
Generator
pulley
Idler pulley
Water pump
pulley
CHECKING BRAKE PEDAL
CHECKING ENGINE DRIVE BELTS
1. With the engine turned off, check the belts
for cracks, fraying, or excessive wear. Re-
place the belt if it is in poor condition.
CLEARANCE
Power
steering
pulley
2.
With your thumb (with a force approx. 10 kg)
press on each belt midway between the
pulleys. Each belt should deflect no more
than the amount shown in figure.
95 in. (75 mm)
COMP.pulley Auto
tensioner
Crankshaft
pulley
Tension
pulley
G190D03HP
YG190A1-E
ADJUSTING DRIVE BELTS
If a belt is loose, adjust it by:
1.
Loosen the adusting bolts just enough so
that the components can be moved.
SSA6180A
Petrol Engine
Power steering pulley
You need a helper to check the brake pedal
clearance. With the engine running, have your
helper press down on the brake pedal several
times and then hold it down with a force of about
2. Whilst pulling outward on the pry bar or
screw driver, test the belt deflection with
your thumb.
3. After tightening the adjusting bolts, be sure
to recheck the belt tension. Overtightening
drive belts can cause excessive wear and
failure in driven components and belts.
Idler pulley
Tension pulley
COMP. pulley
490 N (50 Kg, 110 lbs). The brake pedal clear-
Tension pulley
ance is the distance from the top surface of the
brake pedal to the asphalt sheeting under the
floor mat.
If the brake pedal clearance is not within the
limits specified in the illustration, have it in-
spected by your Hyundai dealer and adjusted
or repaired if necessary.
Generator pulley
Tension pulley
Crankshaft pulley
G190D01HP
6-16
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)