Controls in detail
Power windows
Fully opening the door windows
(Express-open)
Stopping windows during
Express-operation
!
If the upward movement of a door win-
dow is blocked during the closing pro-
cedure, the door window will stop and
open slightly.
̈
Press switch 1 or 2 past the
̈ Press or pull the respective power win-
dow switch again.
resistance point and release.
The corresponding window opens
completely.
Synchronizing power windows
Remove the obstruction, pull the
switch again past the resistance point
and release.
The power windows must be resynchro-
nized each time
Fully closing the door windows
(Express-close)
If the door window still does not close
when there is no obstruction, then pull
the switch and hold it. The door window
will then close without the obstruction
sensor function.
ț
after the battery has been
disconnected.
̈
Pull switch 1 or 2 past the
resistance point and release.
ț
if the power windows cannot be fully
opened (Express-open) or closed
(Express-close).
The corresponding window closes
completely.
G
̈
̈
Switch on the ignition (୴ page 36).
Warning!
Pull the power window switches until
the side windows are closed.
Driver's door only:
If within five seconds you again pull the
switch past the resistance point and re-
lease, the automatic reversal will not func-
tion.
̈
Hold the switches for approximately
one second.
The power windows are synchronized.
251
| Categories | Mercedes-Benz CLK-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLK350, Mercedes-Benz CLK500, Mercedes-Benz CLK55 AMG, Mercedes-Benz W209 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)