Practical hints
What to do if …?
Lamps in instrument cluster
General information:
If any of the following bulbs in the instru-
ment cluster fails to come on during the
bulb self-check when switching on the igni-
tion, have the respective bulb checked and
replaced if necessary.
Problem
Possible cause/consequence
Suggested solution
-
The yellow ABS indicator lamp
The ABS has detected a malfunction and has ̈ Continue driving with added caution.
comes on while driving.
switched off. The BAS and the ESP
®
are also
Wheels will lock during hard braking,
reducing steering capability.
switched off (see messages in display).
The brake system is still functioning normally ̈ Read and observe messages in the
but without the ABS available.
multifunction display (୴ page 383).
If the ABS control unit is malfunctioning,
other systems such as the navigation
system* or the automatic transmission may
also be malfunctioning.
̈ Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.
Failure to follow these instructions in-
creases the risk of an accident.
The charging voltage has fallen below
̈ Switch off electrical consumers that
are currently not needed, e.g. seat
heating*.
10
volts and the ABS has switched off.
The battery might not be charged sufficiently.
̈
If necessary, have the generator (al-
ternator) and battery checked.
When the voltage is above this value
again, the ABS is operational again.
374
| Categories | Mercedes-Benz CLK-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLK350, Mercedes-Benz CLK500, Mercedes-Benz CLK55 AMG, Mercedes-Benz W209 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)