Operation
Tires and wheels
Reactivating the Run Flat Indicator
̈ Switch on the ignition (୴ page 34).
Warning!
G
The tire inflation pressure monitor must be
reactivated in the following situations:
Make sure the standard display menu
appears in the multifunction display
The Run Flat Indicator does not indicate a
warning for wrongly selected tire inflation
pressures. Always adjust tire inflation pres-
sure according to the placard on the driver’s
door B-pillar or fuel filler flap.
(
୴ page 144).
ț
If you have changed the tire inflation
pressure
̈ Press button k or j repeatedly
until the following message appears in
the multifunction display:
ț
ț
If you have replaced the wheels or tires
If you have installed new wheels or
tires
The Run Flat Indicator does not replace reg-
ular checks of the tire inflation pressures
since a gradual pressure loss in all four tires
cannot be detected by the Run Flat
Indicator.
̈ Using the tire placard on the driver’s
door B-pillar or, if available, the inside
of the fuel filler flap, make sure the tire
inflation pressure of all four tires is cor-
rect.
The Run Flat Indicator is not able to issue a
warning due to a sudden dramatic loss of
tire inflation pressure (e.g. tire blowout
caused by a foreign object). In this case
bring the vehicle to a halt by carefully apply-
ing the brakes and avoiding abrupt steering
maneuvers.
̈ Press button æ.
The following message will appear in
the multifunction display:
Tire pres. now
OK?
No Yes
Warning!
G
The Run Flat Indicator can only warn you in
a reliable manner if you have set the correct
tire inflation pressures for each tire.
If an incorrect tire inflation pressure was
set, the system will monitor the pressure ac-
cording to the incorrect value.
343
Product Specification
Categories | Mercedes-Benz CLK-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CLK350, Mercedes-Benz CLK500, Mercedes-Benz CLK55 AMG, Mercedes-Benz W209 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |