Practical hints
What to do if …?
Problem
Possible cause/consequence
Suggested solution
ú
(USA only)
The yellow engine There is a malfunction in:
malfunction indi-
cator lamp comes
on while driving.
̈ Have the vehicle checked as soon as possi-
ble by an authorized Mercedes-Benz Center.
An on-board diagnostic connector is used by
the service station to link the vehicle to the
shop diagnostics system. It allows the accu-
rate identification of system malfunctions
through the readout of diagnostic trouble
codes. It is located in the front left area of the
footwell next to the parking brake pedal.
±
(Canada only)
ț
ț
ț
ț
The fuel management system
The ignition system
The emission control system
Systems which affect emissions
Such malfunctions may result in ex-
cessive emissions values and may
switch the engine to its Limp-Home
Mode (emergency operation).
A loss of pressure has been
̈ Check the fuel cap (୴ page 318).
detected in the fuel system. The fuel
cap may not be closed properly or
the fuel system may be leaky.
If it is not closed properly:
̈
Close the fuel cap.
If it is closed properly:
̈
Have the fuel system checked by an autho-
rized Mercedes-Benz Center.
Your fuel tank is empty.
̈ After refuelling, start turn off and restart the
engine three or four times in succession.
The Limp-Home mode is canceled. You do not
need to have your vehicle checked.
376
| Categories | Mercedes-Benz CLK-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLK350, Mercedes-Benz CLK500, Mercedes-Benz CLK55 AMG, Mercedes-Benz W209 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)