Operation
Engine compartment
Checking engine oil level with the
control system
i
If you want to interrupt the checking
procedure, press the k or j
button on the multifunction steering
wheel.
When checking the oil level
ț
the vehicle must be parked on level
ground
ț
with the engine at operating tempera-
ture, the vehicle must have been
stationary for at least 5 minutes with
the engine turned off
One of the following messages will
subsequently appear in the multifunc-
tion display:
̈ If necessary, add engine oil.
For adding engine oil, see (୴ page 325).
For more information on engine oil, see the
“Technical data” section (୴ page 479) and
ț Engine oil level
ok
ț
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
(
୴ page 481).
ț Add 1.0 qt.
to reach max. oil level
Other display messages
(Canada: 1.0 liter)
If the SmartKey is not turned to position 2
in the starter switch, the following
message will appear:
To check the engine oil level via the
multifunction display, do the following:
ț Add 1.5 qt.
to reach max. oil level
̈
Switch on the ignition (୴ page 34).
Turn on ignition
to see engine oil level
(Canada: 1.5 liter)
The standard display (୴ page 144) should
appear in the multifunction display.
ț Add 2.0 qt.
to reach max. oil level
̈
Switch on the ignition (୴ page 36).
̈
Press buttonk or j on the mul-
tifunction steering wheel until the fol-
lowing message is seen in the
multifunction display:
(Canada: 2.0 liter)
323
| Categories | Mercedes-Benz CLK-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLK350, Mercedes-Benz CLK500, Mercedes-Benz CLK55 AMG, Mercedes-Benz W209 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)