Operation
Engine compartment
̈
Pull out oil dipstick 1 again after
approximately 3 seconds to obtain ac-
curate reading.
Adding engine oil
!
Only use approved engine oils and oil
filters required for vehicles with
The oil level is correct when it is be-
tween the lower (min) mark 3 and
upper (max) mark 2 of oil dipstick 1.
Maintenance System (U.S. vehicles) or
FSS (Canada vehicles). For a listing of
approved engine oils and oil filters,
refer to the Factory Approved Service
Products pamphlet in your vehicle
literature portfolio, or contact an
authorized Mercedes-Benz Center.
i
The filling quantity between the upper
and lower marks on the oil dipstick is
approximately 2.1 US qt. (2.0 l).
1
2
3
Oil dipstick
Upper (max) mark
Lower (min) mark
Using engine oils and oil filters of
specification other than those
̈
If necessary, add engine oil.
To check the engine oil level with the oil
dipstick, do the following:
For adding engine oil, see “Adding en-
gine oil” (୴ page 325).
expressly required for the Maintenance
System (U.S. vehicles) or FSS (Canada
vehicles), or changing of oil and oil filter
at change intervals longer than those
called for by the Maintenance System
(U.S. vehicles) or FSS (Canada vehi-
cles) will result in engine damage not
covered by the Mercedes-Benz Limited
Warranty.
̈
̈
̈
̈
Open the hood (୴ page 321).
Pull out oil dipstick 1.
For more information on engine oil, see
“Fuels, coolants, lubricants, etc.”
(
୴ page 479).
Wipe oil dipstick 1 clean.
For more information on messages in the
multifunction display concerning engine
oil, see the “Practical hints” section
Fully insert oil dipstick 1 into the
dipstick guide tube.
(
୴ page 401).
325
Product Specification
Categories | Mercedes-Benz CLK-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CLK350, Mercedes-Benz CLK500, Mercedes-Benz CLK55 AMG, Mercedes-Benz W209 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |