228
STARTINGANDOPERATING
ShiftPositions
4L
Foradditionalinformationontheappropriateuseofeach
transfercasemodepositionseetheinformationbelow:
4-Wheel-Drive Low Range - Low speed 4 wheel drive.
Locksthefrontandreardriveshaftstogether.Forcesthe
front and rear wheels to rotate at the same speed.
Additional traction and maximum pulling power for
loose,slipperyroadsurfacesonly.Donotexceed25mph
2H
Rear Wheel Drive High Range - Normal street and
highwaydriving.Dryhardsurfacedroads.
(40
km/h). (Allows engine starting without depressing
4H
4-Wheel-Drive
driveshaftstogether.Forcesthefrontandrearwheelsto
rotate at the same speed. Additional traction for loose,
slipperyroadsurfacesonly.
the clutch pedal on vehicles equipped with manual
transmission. Refer to “Starting Procedures — Manual
Transmission(4WDModelsOnly)”inthissection.
High Range - Locks the front and rear
ShiftingProcedure
2Hto4Hor4Hto2H
N
Shifting between 2H and 4H can be made with the
vehicleinmotionupto55mph(88km/h).Thetransfer
case will engage/disengage faster if you momentarily
release the accelerator pedal after completing the shift.
Apply a constant force when shifting the transfer case
lever.
Neutral-Disengagesboththefrontandreardriveshafts
from the powertrain. To be used for flat towing behind
another vehicle. Refer to “Recreational Towing” in Sec-
tion5formoreinformation.
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)