Do not place heavy or hard objects on the
roll-up cover. If you do so, they may
BMW X6: cargo bay cover
already pose a danger to vehicle occupants dur-
ing braking or evasive maneuvers.
Do not allow the roll-up cover to snap back, oth-
erwise it can be damaged.<
Removing
1.
Unlock the case with the button, arrow 1.
Deploy cargo bay cover by pulling back.
Do not place heavy or hard objects on the
cargo bay cover. If you do so, they may
pose a danger to vehicle occupants during
braking or evasive maneuvers.<
Removing
2.
Swing the case somewhat to the left,
arrow 2, and remove.
Installing
When installing, proceed in the opposite order
of removal.
1.
Grasp retracted cargo bay cover under-
neath the upper fold on both sides.
2.
3.
Pull the cover back out of the side brackets.
Depending on your vehicle's equipment
package, you can store the cover under the
floor panel in the cargo bay.
1.
2.
3.
4.
Lay on the case on the left-hand side and
push it forward, arrow 1.
Swing the case toward the inside, refer to
arrow 2.
Push the case forward at the ends until it
engages in the two side brackets.
Check whether the case is properly locked
in place by pulling it with a sudden move-
ment.
131
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW X5 35d, BMW X5 48i, BMW X5 xDrive30i, BMW X6 48i, BMW X6 xDrive30i |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)