Locking
Signaling briefly
Press lever to resistance point and hold for as
long as you wish to signal.
Triple turn signal activation
Press the lever up to the resistance point. The
turn signal flashes three times.
You can activate or deactivate this function.
iDrive, for operating principle refer to page 16.
1.
Press the
This opens the start menu.
button.
1.
Pull out the releasing tool.
The transmission lock is engaged again.
2.
3.
4.
Press the controller to open the menu.
Select "Settings" and press the controller.
2.
3.
If necessary, insert the lock* and lock it.
Close the cover in the bottom of the cup
holder and lay in the mat again.
Select "Vehicle / Tires" and press the con-
troller.
4.
Close the cover of the cup holder and stow
the releasing tool.
5.
Change to upper field if necessary. Turn the
controller until "Lighting" is selected and
press the controller.
Information on jump starting and towing, from
page 280.
Turn signals/headlamp
flasher/high beams
6.
Select "Triple turn signal" and press the
controller.
Triple turn signaling is activated.
The setting is stored for the remote control cur-
rently in use.
1
2
3
High beams
Headlamp flasher
Turn signals
Using turn signals
Press the lever beyond the resistance point.
To switch off manually, press the lever up to the
resistance point.
Atypically rapid flashing of the indicator
lamp indicates that a turn signal bulb
needs to be replaced.<
73
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW X5 35d, BMW X5 48i, BMW X5 xDrive30i, BMW X6 48i, BMW X6 xDrive30i |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)