Selecting displays
1.
Select "Maneuvering aids" and press the
controller, refer to Activating driver assis-
tance functions.
2.
Turn the controller until "View selection" is
selected and press the controller.
6.
Select "Settings" and press the controller.
3.
Select the desired display and press the
controller.
The setting is stored for the remote control cur-
rently in use.
7.
Select the desired functions and press the
controller.
The picture of the rear view camera and
PDC is hidden when the vehicle is
The settings are stored for the remote control
currently in use.
stopped, the transmission is in R or D, and you
disconnect the driver's safety belt and open the
driver's door.<
Displays on Control Display
Setting brightness
You can have the picture from the rear view
camera displayed in several formats and in
combination with the PDC Park Distance Con-
trol, refer to page 92.
In addition, you also have the option of display-
ing only the PDC Park Distance Control.
You can set the brightness of the camera view
with the rear view camera switched on.
iDrive, for operating principle refer to page 16.
1.
2.
Press the controller.
Turn the controller until "Brightness" is
selected and press the controller.
>
>
>
"Camera picture and PDC"
The rear view camera picture is shown in
the main window of the Control Display.
3.
Set the desired brightness.
"Camera view: full screen"
The picture of the rear view camera is
shown on the entire Control Display.
"Camera view: main window"
The picture of the rear view camera is
shown in the main window of the Control
Display.
>
"PDC in main window only"
PDC is shown in the main window of the
Control Display.
95
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW X5 35d, BMW X5 48i, BMW X5 xDrive30i, BMW X6 48i, BMW X6 xDrive30i |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)