The temperature is reduced, if need be, down to
no heat in order to reduce the load on the bat-
tery. The LEDs remain lit.
Temperature distribution without
active seat ventilation
The heat output can be distributed variously in
the seat cushion and the backrest.
Rear
iDrive, for operating principle refer to page 16.
1.
2.
Open the start menu.
Move the controller to the left to open "Cli-
mate".
3.
4.
Select "Seat heater distribution" and press
the controller.
Move the controller to the left or right to
select "Driver" or "Passenger".
Operation similar to front seat heating; without
temperature distribution.
Active seat ventilation* and
seat heating*
Front
5.
Turn the controller. The adjustment is
applied; the field can be changed.
Temperature distribution with active
seat ventilation
The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for operating principle refer to page 16.
1.
2.
Open the start menu.
1
2
Seat heating
Move the controller to the left to open "Cli-
mate".
Active seat ventilation
Press button 1 or 2 once depending on the
temperature or ventilation position. The LED in
the respective button lights up.
3.
Select "Driver's seat climate" or "Passen-
ger's seat climate" and press the controller.
The temperature or ventilation levels are shown
on the Control Display.
The air quantity is reduced and if need be, the
ventilation is switched off in order to reduce the
load on the battery. The LEDs remain lit.
To switch off: press button 1 or 2 longer.
56
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW X5 35d, BMW X5 48i, BMW X5 xDrive30i, BMW X6 48i, BMW X6 xDrive30i |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)