Closing without pinch protection
system
3.
Release and disconnect the motor plug.
This significantly reduces the effort
required for the manual movement.
In case of danger from outside, slide the switch
forward beyond the resistance point and hold.
The roof closes without the pinch protection
system.
Following interruptions in electrical
power supply
After a power loss, the sunroof may only
respond to the raise command. Then have the
system initialized. BMW recommends having
this work carried out by your BMW Sports
Activity Vehicle Center.
4.
Insert the Allen wrench* from the onboard
tool kit, refer to page 269, into the opening
provided. Move the panorama glass sunroof
in the desired direction.
Moving manually*
In the event of an electrical malfunction, you can
move the sunroof manually:
1.
Remove trim piece. To do so, gently lift the
corner of the trim piece with a screwdriver.
5.
6.
Reconnect the plug.
Clip the trim piece into the cover panel,
arrow 1. Then fold the cover panel forward
until it audibly clicks into place, arrow 2.
2.
Using the screwdriver, press in the clamps
one after the other, arrows 1, tilt the cover
panel down, arrow 2, and remove.
44
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW X5 35d, BMW X5 48i, BMW X5 xDrive30i, BMW X6 48i, BMW X6 xDrive30i |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)