>
The engine can only be started if the vehicle
detects that the remote control is located in
the vehicle.
Comfort closing
Hold a finger or the back of a hand on the sur-
face, arrow 2.
The windows and the glass sunroof*/panorama
glass sunroof* are closed.
Comparison with ordinary remote
control
Watch during the closing process to be
sure that no one is injured. Removing the
hand from the door handle immediately stops
the closing process.<
You can control the functions mentioned previ-
ously with the comfort access or by pressing
the buttons on the remote control. Therefore,
please familiarize yourself with the information
on opening and closing beginning on page 28
beforehand.
Opening liftgate
Press the button on the liftgate.
The special features when using comfort
access are described in the following.
This corresponds to pressing the
button.
If a remote control accidentally left in the
cargo bay is detected in the locked vehi-
cle after the liftgate is closed, then the liftgate
opens again. The hazard warning flashers flash
and a signal* sounds.<
Should a short delay occur when opening
or closing the windows or the glass sun-
roof*/panorama glass sunroof*, the system
checks whether a remote control is located in
the vehicle. Please repeat opening or closing if
necessary.<
Switching on radio readiness
By briefly pressing the Start/Stop button, you
switch on the radio readiness, refer to page 65.
Releasing
When doing so, do not depress the brake
pedal, otherwise the engine will start.<
Starting engine
You can start the engine or switch on the igni-
tion if a remote control is located in the interior
of the vehicle. It need not be inserted in the igni-
tion lock, refer to page 65.
As long as no remote control is detected in the
vehicle, it is only possible to restart the engine
within approx. 10 seconds after it is switched off
if no door has been opened.
Completely grasp a door handle, arrow 1.
This corresponds to pressing the
button.
Locking
Touch the area highlighted in the picture,
arrow 2, with your finger for approx. 1 second.
Switching off engine
>
Remote control not in ignition lock:
After switching off the engine, the transmis-
sion is automatically switched into trans-
mission position P.
This corresponds to pressing the
ton.
but-
Please make sure that all electronic sys-
tems/consumers are switched off before
locking to save the battery.<
>
Remote control in ignition lock:
If transmission position N is engaged, the
transmission remains in this position after
the engine is switched off.
40
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW X5 35d, BMW X5 48i, BMW X5 xDrive30i, BMW X6 48i, BMW X6 xDrive30i |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)